449 - Simon Hope demo - Screw Lid Box - Geoff Hawkins - Turning

Galleries
2012 - Galleries May-Aug
Galleries - Simon Hope demo - 16/Jun/2012
449 - Simon Hope demo - Screw Lid Box

449 - Turning Club - Simon Hope 2012 - Box with Threaded Lid.

This gallery shows, step by step, the process followed to create the Box with Threaded Lid using Blackwood Thread Rings.

Simon Hope Demo 2012 - Screw Lidded Box - "… the base is screwed on and the bottom finished.". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… the completed box...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "After shaping the outside a round nosed engineering cutter makes light work of hollowing...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… the round nosed engineering milling cutter.". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… the box has been hollowed and sanded...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… a pre-cut Blackwood thread ring is fitted and superglued into place...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… a pre-cut Blackwood thread ring is fitted and superglued into place...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… the underside of the lid is shaped and a spigot cut to take the pre-formed Blackwood threaded ring...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… the Blackwood threaded ring is Superglued into place...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… the Blackwood threaded ring is Superglued into place...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… the Blackwood threaded ring is Superglued into place...". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… the box part has been finished". Photo taken 16 Jun 2012.

Simon Hope Demo 2012 - Screw Lidded Box - "… reverse mounted … beads are cut … and the top is finished...". Photo taken 16 Jun 2012.