Geoff Hawkins - Turning - Turning Club - 22/Oct/2011 - theme "Weird"

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Indexing Ring mounted in chuck and with 24 holes on circumference (every 15 degrees).". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "A 6mm bolt locks the indexing ring. It is mounted in the tool rest holder.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "A router is mounted in this jig which follows a 6mm template position and fixed to the base.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "A router is mounted in this jig which follows a 6mm template position and fixed to the base.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Construction of the router jig base which fits, and slides, between the lathe bed bars.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Rounter mounted on the slide. For parallel flutes the cut depth is set by moving the perspex stop.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Rounter mounted on the slide. For parallel flutes the cut depth is set by moving the perspex stop.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "For tapered flutes the brass "follower" controls the depth of cut.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Router mounting detail...". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Construction of the router jig base which fits, and slides, between the lathe bed bars.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Construction of the router jig base which fits, and slides, between the lathe bed bars.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Construction of the router jig base which fits, and slides, between the lathe bed bars.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Construction of the router jig base which fits, and slides, between the lathe bed bars.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Indexing ring mounted in the chuck - the morse taper drive can also be seen". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Roy demonstrated beads, coves, fillets and fluting - using the router jig.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Roy demonstrated beads, coves, fillets and fluting - using the router jig.". Photo taken 22 Oct 2011.

Roy Boulton

Sat, 18 Apr 2015 12:23:32 +0000

Roy Boulton / Roy Boulton - "Roy demonstrated beads, coves, fillets and fluting - using the router jig.". Photo taken 22 Oct 2011.

Bob Burn

Sat, 18 Apr 2015 12:23:32 +0000

Bob Burn / Bob Burn - "Bedside Lamp". Photo taken 22 Oct 2011.

Peter Silk

Sat, 18 Apr 2015 12:23:32 +0000

Peter Silk / Peter Silk - "Maple Platter with Black design in vinyl.". Photo taken 22 Oct 2011.

Chris Humberstone

Sat, 18 Apr 2015 12:23:32 +0000

Chris Humberstone / Chris Humberstone - "work in progress...". Photo taken 22 Oct 2011.