Turning Club - 08/Nov/2014 - Nick Arnull - Geoff Hawkins - Turning

Galleries
2014 - Galleries 0ct-Dec
Turning Club - 08/Nov/2014 - Nick Arnull

Turning Club - 08/Nov/2014 - Nick Arnull demo.

Nick created a lidded box in Elm with texturing plus a wide rimmed dish in Ash. In both cases this included detailed hints, tips and instruction for turners of all levels.

Nick Arnull - textured box - "Elm Blank - approx 100mm long" - Photo: 8 Nov 2014.

Nick Arnull - textured box - "chucking spigot added, parted off at 30mm, the lid is not being hollowed..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "forming a square cornered bottom for the lid..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "decorating the inside of the lid with a beading tool..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "decorating the inside of the lid with a beading tool..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "a point tool accentuated the edges of the beads..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "the inside of the lid has been finished and cellulose sanding sealer applied..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... the base has been hollowed and now the rim lip is being cut to fit into the lid..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... the lid held by a jam chuck of paper ready for shaping..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... the waist shape of the box has been formed..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... removing the chucking spigot of the lid..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "...marking out the poisition of the lid beads..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... forming the lid beads..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... the lid beads and the outer corner formed ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... the top is being castellated with a round microplane..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... castellation continues ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "texturing tool ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "figure of 8 pattern applied ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "texturing has been completed ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "remounted for finishing ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "cellulose spray sanding sealer applied ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "the base has been mounted on a jam chuck ready to remove the mounting spigot" - Photo: 8 Nov 2014.

Nick Arnull - textured box - "... the spigot gone - decorative beading added to the base ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "...views of the decorated lidded box ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "...views of the decorated lidded box ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "...views of the decorated lidded box ..." - Photo: 8 Nov 2014.

Nick Arnull - textured box - "...views of the decorated lidded box ..." - Photo: 8 Nov 2014.

Nick Arnull - "Nick demos - 8/Nov/2014" - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "riding the bevel properly - a clean cut and a smooth cutting sound - like a wood plane..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "note riding the bevel - a rougher cut with fibre tearing breakout" - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "cutting cleanly - good shavings and a smooth appearance with no tearing ..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "" - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "the spigot has been prepared - concaves as it will be a permanent feature..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "clean push cut ..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "profiling the rim ..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "a pointing tool used to accent the edges of the bead..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "hollowing ..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "this version has an accented bead between the rim and the dish..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "trying out options - two beads with a shallow cove between them - all accentuated with a point tool..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "re-profiling the rim ..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "the rim has been re-profiled a little thinner ..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "after sanding cellulose spray sanding sealer applied to the dish centre ..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "the dish showing the change of appearance after sanding and sealing..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "the dish showing the change of appearance after sanding and sealing..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "the dish showing the change of appearance after sanding and sealing..." - Photo: 8 Nov 2014.

Nick Arnull - Wide rimmed dish. - "the base of the wide rimmed dish ..." - Photo: 8 Nov 2014.

Lesley Wyatt - "Goblet with Dragon Design pyrography." - Photo: 8 Nov 2014.

Lesley Wyatt - "Goblet with Dragon Design pyrography." - Photo: 8 Nov 2014.

Lesley Wyatt - "Goblet with Dragon Design pyrography." - Photo: 8 Nov 2014.

Lesley Wyatt - "Goblet with Dragon Design pyrography." - Photo: 8 Nov 2014.